This is pretty clear, a water leak is a Leak that either comes from pipes, plumbing fixtures, and fittings which are most of the time, a significant source of water waste for many households. Some leaks are obvious, such as dripping faucets and leaking water heaters. But, unfortunately, many leaks go undetected for years because the source of the leak is not visible.
How do water leaks happen?
You can also look for a puddle underneath the tank. Toilet leaks can come from the water supply or tank, but the most damaging leaks occur at the flange and wax ring. When pipes running behind walls burst or begin to leak, they moisten the drywall. This moisture makes its way through the walls and produces wet spots.
How do you prevent water leaks in your house?
There are a few simple tips that you can follow to avoid and prevent water leaks.
- Clean your gutters.
- Direct downspouts 5-10' away from the house.
- Test your sump pump once a year.
- Fix all water leaks.
- Replace missing roof shingles.
How can I protect my house from water damage?
1. Disconnect Hoses
Standing water in a hose may freeze back into the pipe and create an ice block that stops your water flow and, worst case, may bust your pipes and create damage to walls, floors, and foundation.
2. Know your Water Main
Know the location of your water main and shut it off if you leave for an extended amount of time.
3. Check Appliances Regularly
Check and maintain your appliances regularly for leaks according to the manufacturer’s directions.
4. Investigate Leaks Right Away and Fix Promptly
If you opt to ignore moisture damage or postpone making the necessary repairs be prepared to experience mold, mildew, dry rot, or even structural damage to your home.
5. Upgrade Washing Machine Hoses
Old, brittle or leaky washing machine hoses are among the most frequent causes of water loss for homeowners.
6. Install Water Detection Devices
A water detector is a small electronic device that sounds an alarm when its sensor is in contact with moisture. Its main benefit is that it detects low moisture levels or slow leaks that often go unnoticed. Install it near water heaters, sump pumps, washing machines, dishwashers and toilets to prevent extensive damage and mold growth.
7. Check Your Water Pressure
If the water pressure to your home is set too high, pipes and hoses may fail under the pressure.
8. Monitor Your Water Bill
Sometimes, the only way you know that water is leaking is by taking a closer look at your water bill. If your usage jumps significantly from one month to the next without explanation, then you might be in trouble. Call a plumber expert in the Water Leak Detection Services.